Dripbox - 60W Mod

Kanger


£26.00




Kit contains:

1 x Dripbox mod

1 x Spare bottle

1 x Pre-built spare deck

1 x Set of coils and cotton

1 x USB to Micro-USB lead

N.B. This device needs 1 x 18650 mod battery (sold separately) to operate.

 

Description

A perfect mod for those that want to start dripping but aren't sure how to. The mod provides a regulated 60W output and fires on coils down to 0.2ohm. Charging is made convenient by the micro-USB port on the base allowing the device to be charged not only by the included cable but also from many 5V mobile phone adapters. Included in the kit is a USB charge lead. 

Atop the device is a sunken 510 connector that can fit a variety of tanks, however the RDA that is included has the advantage that the liquid on the coils can be replenished not just by dripping from above but by squeezing the 7ml bottle below. The liquid feeds up from this bottle and into the base of the RDA.

The deck of the RDA comes pre-built and ready to go. A spare pre-built deck is also provided so that you can ensure no down time for your mod when you want to swap and rebuild coils. 

 

    How to use the Dripbox

    1. Press the fire button 5 times to turn on.
    2. Fill the bottle with eliquid and insert into mod.
    3. Squeeze the bottle so that liquid flows up into RDA and allow wicks to soak. 
    4. Hold the fire button to activate the atomiser and draw in vapour whilst holding.
    5. When taste starts to feel drier, squeeze bottle again to replenish wocks.
    6. To lock the device fully, press the fire button five times.

    Share this Product